# PPG Industries, Inc.

> PPG’s May 20, 2025 announcement describes ENVIROLUXE Plus powder coatings with up to 18% post-industrial recycled plastic (rPET). This is a dated formulation claim, not evidence of current shipment volumes, facility throughput or customer adoption.

- Industry: Chemicals & Advanced Materials
- Collection: Active
- Regions: Asia, North America
- Countries: Thailand, United States
- Materials: PFAS, Plastics, Solvents, Water
- Processes: Recycling
- Evidence through: 2026-09-18
- Canonical URL: https://www.materialtransition.com/library/ppg-industries-inc

## Top material flows in

Pittsburgh, Pennsylvania, U.S. · Chemicals & materials · Automotive, aerospace & equipment

PPG’s May 2025 launch announcement describes up to 18% post-industrial rPET in ENVIROLUXE Plus, while its 2025 milestone summary calls the introduced product 18% post-consumer recycled plastic. The reviewed company sources conflict on feedstock classification; this brief does not resolve the discrepancy. Neither source establishes shipment volume or current availability.

PPG reports that its collaboration with GDB International reclaimed 2,981 metric tons of materials in 2025 and generated more than $1.34 million in savings. PPG says the collaboration handles unused pigments, resins, solvents, frozen paint, and waste or wash water that cannot be recovered onsite. The disclosure does not provide a stream-by-stream mass balance, grade, destination, or customer acceptance, and does not establish that all 2,981 metric tons were coatings waste or saleable feedstock.

- Resins, pigments, solvents and additives across three coating segments (Architectural, Performance, Industrial)
- ENVIROLUXE Plus: PPG’s launch announcement says up to 18% post-industrial rPET; its 2025 milestone summary says post-consumer recycled plastic. Feedstock classification remains unresolved
- Specialty aerospace-coating chemistries for the new Shelby, NC facility (under construction)

### Top waste & residual flows

- No company-wide TRI total is presented: the facility matches and ownership perimeter have not been reconciled.
- Directional residual classes: paint sludge, solvent-laden wastewater, VOC emissions, off-spec batches, spent containers

The announcement does not establish feedstock supply volume, a manufacturing-site quantity or a Material Transition pilot.

## Who controls the physical system

Parent → legal entity → owner → operator → plant, as resolved from public filings.

- **Legal entity:** PPG Industries, Inc. (Pennsylvania corporation), NYSE: PPG
- **Headquarters:** Pittsburgh, Pennsylvania
- **Reportable segments:** Global Architectural Coatings · Performance Coatings · Industrial Coatings. PPG completed the sale of its U.S. and Canada architectural-coatings business in 2024; that business is outside the retained reporting perimeter. [11]
- **New capacity:** $380M aerospace coatings and sealants facility, Shelby, North Carolina (announced; expected complete 2027) · new waterborne automotive coatings plant, Samut Prakan, Thailand

### Financial scale

Scale proxies only, not raw-material purchasing volume unless stated.

- **Ticker / CIK:** PPG / SEC CIK 0000079879
- **FY2025 net sales:** $15.9B, +2% organic growth (reported)
- **Performance Coatings:** +5.3% net sales, aerospace, protective/marine, and traffic-solutions businesses led growth
- **Industrial Coatings:** Share gains in automotive OEM, industrial and packaging coatings (FY2025)

### Physical system, in plain terms

PPG formulates and manufactures coatings across three segments, architectural paint, performance coatings (aerospace, protective/marine, traffic solutions) and industrial coatings (automotive OEM, industrial, packaging), combining petrochemical resins, pigments, solvents and additives into liquid and powder products shipped to customer application sites rather than consumed on PPG's own production lines. The sources reviewed here do not establish a facility-level allocation of PPG residual streams or quantify customer-site coating waste.

## Production footprint and plant evidence

| Site | Location | Role / evidence |
|-|-|-|
| New aerospace coatings & sealants facility (under construction) | Shelby, North Carolina, U.S. | Announced $380M investment; expected completion 2027. Will serve aerospace coatings and sealants demand. |
| Waterborne automotive coatings plant | Samut Prakan, Thailand | New facility inaugurated 2025 (international, included for footprint context, not a U.S. TRI-matched site). |

The imported 2024 TRI match contains 37 U.S. facility leads. This targeted review does not reverify their ownership or allocate reported chemical quantities to a particular product.

### Materials and packaging entering the system

| Material / input | Family | Evidence status |
|-|-|-|
| Resins and polymer binders | Coating formulation base | Directional, standard coatings-industry input; PPG-specific volumes not public |
| Post-industrial recycled plastic (rPET) | Recycled-content feedstock | PPG announced up to 18% post-industrial recycled plastic (rPET) in ENVIROLUXE Plus, May 20, 2025; this does not establish supplier volume or a plant-specific flow. [10] |
| Solvents, pigments and additives | Coating formulation inputs | Directional, standard input class across all three PPG segments |

### Products and product families

| Product / segment | End market | Evidence status |
|-|-|-|
| Enviroluxe Plus powder coatings | Industrial and architectural applications | Dated company formulation claim: up to 18% post-industrial recycled plastic (rPET), May 20, 2025. [10] |
| Aerospace coatings and sealants | Commercial and defense aircraft | Segment identified; growing double-digit in both price and volume, FY2025, per company disclosure |
| Automotive OEM and industrial coatings | Auto manufacturing, general industrial, packaging | Segment identified; PPG reports share gains in FY2025; SKU-level formulation not public |

## Process and conversion

Coating manufacture is a formulation and batch-mixing process, combining resin, pigment, solvent and additive streams into a finished liquid or powder product, then quality-testing and packaging for shipment. Potential residual categories associated with coating formulation can include off-spec batches, equipment-cleaning wastewater, VOC emissions, and paint sludge. These are screening categories, not verified PPG facility outputs. The sources reviewed here do not establish PPG-specific residual quantities or allocate streams to matched sites. No company-wide TRI total is presented because the facility matches and ownership perimeter have not been reconciled. The sources reviewed here do not establish PPG-specific residual quantities or allocate streams to matched sites. No company-wide TRI total is presented because the facility matches and ownership perimeter have not been reconciled. PPG’s May 2025 launch announcement describes up to 18% post-industrial rPET in ENVIROLUXE Plus, while its 2025 milestone summary calls the introduced product 18% post-consumer recycled plastic. The reviewed company sources conflict on feedstock classification and do not establish actual shipment volume, current availability, or feedstock preparation.

### TRI scope limitation

## Regulatory position

- TSCA/PFAS and REACH restrictions apply directly to coating chemistries, particularly aerospace and industrial formulations that have historically used PFAS-based additives for durability and chemical resistance.
- EU End-of-Life Vehicles rules are directionally relevant to PPG's automotive OEM coatings business given recycled-content and material-declaration requirements in that market.
- State VOC emission rules apply to PPG's coating-manufacturing and paint-formulation facilities; specific facility-level compliance status is not itemized in this brief.

### Certification and standards signals

- IATF 16949 (automotive quality management) is the relevant standard for PPG's automotive OEM coatings business; no specific certificate number or site scope is verified in this brief.
- PPG states it became the first U.S.-based coatings company to receive third-party certification of tools and processes that quantify environmental impact, company-reported; the specific registry and scope are not independently verified here.
- ISCC PLUS and UL 2809 (recycled-content certification) are the standards most relevant to verifying the Enviroluxe Plus recycled-content claim; no specific certificate is confirmed for that product in this brief.

### Innovation, pilots and announced capacity

- PPG announced ENVIROLUXE Plus powder coatings with up to 18% post-industrial recycled plastic (rPET) on May 20, 2025. The announcement does not establish actual shipment volumes or current availability. [10]
- $380M investment in a new aerospace coatings and sealants facility in Shelby, NC, expected complete 2027 (Reported, announced capacity, not yet operating).
- New waterborne automotive coatings plant inaugurated in Samut Prakan, Thailand (Reported, operating, international).

## Evidence and source boundaries

PPG’s May 2025 launch announcement describes up to 18% post-industrial rPET in ENVIROLUXE Plus, while its 2025 milestone summary calls the introduced product 18% post-consumer recycled plastic. The reviewed company sources conflict on feedstock classification; neither establishes production volume, a feedstock supplier, extension into another product line, buyer demand or a Material Transition pilot. Launch source [10] · 2025 milestone source [2]

### Sources

- PPG reports fourth quarter and full-year 2025 financial results
  PPG Industries, Inc. Investor Relations · 2026 · freshness: Current
  https://investor.ppg.com/news/news-details/2026/PPG-reports-fourth-quarter-and-full-year-2025-financial-results/default.aspx [1]
- 2025 Strategic Milestones
  PPG Industries, Inc. · Accessed Sep 16, 2026 · freshness: Current
  https://www.ppg.com/en-US/about-ppg/strategic-milestones [2]
- PPG Industries Inc, Form 10-K, FY2025
  U.S. Securities and Exchange Commission (EDGAR) · Filed 2026 · freshness: Current
  https://www.sec.gov/Archives/edgar/data/79879/000007987926000046/ppg-20251231.htm [3]
- PPG Industries Inc company facts (XBRL)
  SEC EDGAR companyfacts API · Accessed Sep 16, 2026 · freshness: Current
  https://data.sec.gov/api/xbrl/companyfacts/CIK0000079879.json [4]
- TRI Basic Data Files, Calendar Years 1987---Present
  U.S. EPA Toxics Release Inventory Program · 2024 reporting year · freshness: Current
  https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present [5]
- 2025 Sustainability Report
  PPG · current primary disclosure
  https://www.ppg.com/en-US/sustainability [6]
- Waste and Circular Economy
  PPG · current primary disclosure
  https://www.ppg.com/en-SK/sustainability/waste [7]
- Product Stewardship
  PPG · current primary disclosure
  https://www.ppg.com/en-US/sustainability/product-stewardship [8]

## Material Transition editorial interpretation

PPG’s May 2025 launch announcement describes up to 18% post-industrial rPET in ENVIROLUXE Plus, while its 2025 milestone summary calls the introduced product 18% post-consumer recycled plastic. The reviewed company sources conflict on feedstock classification; neither establishes current shipment volume, commercial scale or another product line’s formulation. Launch source [10] · 2025 milestone source [2]

## Sources

- [1] PPG reports fourth quarter and full-year 2025 financial results - https://investor.ppg.com/news/news-details/2026/PPG-reports-fourth-quarter-and-full-year-2025-financial-results/default.aspx - PPG Industries, Inc. Investor Relations · 2026 · freshness: Current
- [2] 2025 Strategic Milestones - https://www.ppg.com/en-US/about-ppg/strategic-milestones - PPG Industries, Inc. · Accessed Sep 16, 2026 · freshness: Current
- [3] PPG Industries Inc, Form 10-K, FY2025 - https://www.sec.gov/Archives/edgar/data/79879/000007987926000046/ppg-20251231.htm - U.S. Securities and Exchange Commission (EDGAR) · Filed 2026 · freshness: Current
- [4] PPG Industries Inc company facts (XBRL) - https://data.sec.gov/api/xbrl/companyfacts/CIK0000079879.json - SEC EDGAR companyfacts API · Accessed Sep 16, 2026 · freshness: Current
- [5] TRI Basic Data Files, Calendar Years 1987---Present - https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present - U.S. EPA Toxics Release Inventory Program · 2024 reporting year · freshness: Current
- [6] 2025 Sustainability Report - https://www.ppg.com/en-US/sustainability - PPG · current primary disclosure
- [7] Waste and Circular Economy - https://www.ppg.com/en-SK/sustainability/waste - PPG · current primary disclosure
- [8] Product Stewardship - https://www.ppg.com/en-US/sustainability/product-stewardship - PPG · current primary disclosure
- [9] PPG Industries, Inc. FY2025 Form 10-K - https://www.sec.gov/Archives/edgar/data/79879/000007987926000046/ppg-20251231.htm - The sale was limited to the U.S. and Canada architectural-coatings business; it does not mean PPG exited architectural coatings globally.
- [10] PPG ENVIROLUXE Plus announcement, May 20, 2025 - https://investor.ppg.com/news/news-details/2025/PPG-introduces-PPG-ENVIROLUXE-Plus-powder-coatings-with-recycled-plastic-content/default.aspx - Dated company announcement, not current availability, shipments, commercial scale, feedstock volume or a resin-denominator transfer. Capture is an excerpt transcript, not raw HTML.
- [11] PPG FY2025 Form 10-K - https://www.sec.gov/Archives/edgar/data/79879/000007987926000046/ppg-20251231.htm - Geographic divestiture boundary only; retained Global Architectural Coatings remains distinct.
- [12] EPA: Common TRI Terms - https://www.epa.gov/toxics-release-inventory-tri-program/common-tri-terms - Definitions only. Does not validate the imported company aggregates, facility matches, equipment or recovery yields.

From the Material Transition company brief library: https://www.materialtransition.com/library/ppg-industries-inc